Hall Research UVB1-CP-S - Manual (Page 4)

UVB1-CP User's Manual
4
5.0 Troubleshooting
Most common problems are caused by the following:
• You have confused the Sender and the Receiver
• You have mismatched the RGB colors on the cable connections to
the box and equipment
• You are using a Cat5 cable that is too long or is not straight
through
• You have not connected the power supply, or it is not powered
• Your Monitor does not support the resolution that you are sending
it (in which case you should check operation without the Balun first)
5.1 Contacting Hall Research and Shipping/Packaging
Contact the Hall Research Technical Support Department at 714-641-
6607 or via email or web. Before you do, make a record of the history of the
problem. We will be able to provide more efficient and accurate assistance
if you have a complete description. If you need to ship your converter for
repair, make sure to get a Return Material Authorization (RMA) number
first.
6.0 Specifications
Standards Analog Component Video YPbPr or RGB signals with
sync-on-green.
Resolutions All Standard TV and HDTV from 480i to 1080p
Video Level 1.0 volt p-p on Y and 0.7 v p-p on Pb and Pr
Bandwidth 20 Hz to 450 MHz
Common Mode
Noise Rejection
100 dB @ 60 Hz, 70 dB @ 1 MHz, 50 db @ 10 MHz
Max Distance Up to 1000 ft. (305 meters) - See table 4.1 for details
Temperature Operating: 32 to 122 Deg F (0 to 50 Deg C);
Storage: -40 to +185 Deg F (-40 to +85 Deg C)
Enclosure Black Plastic ABS-94VO, UL File#56070
MTBF 100,000 hours (calculated estimate)
Power Via the included power adapter. Voltage: 9v DC Center-
Positive. Average Power Consumption: 850 milliwatts
Size (H x W x D) 1.1” H x 2.6” W x 2.6” D Each Device