Gryphon Mirage - Manual (Page 14)

assigned maximum volume set-
ting will appear in the display. To
change this setting, press
Volume Up or Down until the
desired maximum volume level
is displayed. Press Monitor. The
selected maximum volume set-
ting is now stored in memory.
CHANGE MAX LEVEL
will
appear in the display. Press
Menu to select the next menu-
controlled function.
Setting Start-Up Level
You can select and store in
memory a default volume level
(between 00 and 20) which will
automatically be set by the
amplifier each time you turn it
on. When CHANGE START
LEVEL appears in the display,
press Monitor. START LEVEL:
and the current default start level
will appear in the display. To
change this setting, press
Volume Up or Down until the
desired start level is displayed.
Press Monitor. The selected start
level is now stored in memory
and will be set each time you
turn on the amplifier. CHANGE
START LEVEL will appear in the
display. Press Menu to select the
next menu-controlled function.
Balance
Whitin the balance menu you
can change the interchannel bal-
ance with 1 db. steps ( +- 6db )
default is 0dB
Input level Match
Within the level match menu
you must choose the input that
you wish to adjust. This is done
with the up/down function.
After you have selected your
input you can increase the level
in 1 dB steps from 0 dB to +
8dB.
Default is 0dB on all inputs.
Setting Display
Brightness
You can select and store in
memory the desired level of
brightness in the front-panel dis-
play. When BRIGHTNESS CON-
TROL appears in the display,
press Monitor. BRIGHTNESS
will appear in the first line of the
display. 100% 75% 50% 25%
OFF will appear in the second
line. The 100% indicator will
blink. Press an Input button
repeatedly until the desired level
of brightness blinks. The display
will immediately change to the
selected brightness, unless you
have selected OFF. If OFF is
selected, the display will turn off
after you exit the Menu. Press
Monitor. The selected brightness
level is now stored in memory.
BRIGHTNESS CONTROL will
appear in the display. Press
Menu to select the next menu-
controlled function.
14