Gryphon Mirage - Manual (Page 11)

Two sets of balanced XLR out-
puts marked OUTPUT 1 and
OUTPUT 2 are provided. These
outputs allow easy bi-amping or
multi-room operation.
If you are using a Gryphon
Antileon or Antileon Solo power
amplifier, you may choose to
connect the Green Bias control
link for automatic regulation of
Class A bias to the socket
marked BIAS CONTROL on the
preamplifier and on the power
amplifier.
The Antenna must be connect-
ed to the socket marked ANT.
The range is 10 meters provid-
ing that the units are visible to
each other
Link in is automatic switching
the Mirage on when connected
to a unit with same feature and
protecol.
The RS232 D-Sub 9 connection
is a communication port for
interface with AMX/Creston
home automation systems.
Link out is automatic switching
other compatible units on from
the Mirage
Connections on the dis-
play/control unit.
Connect the supplied AC pow-
ersupply to the AC input on the
unit.
Front panel and
remote functions
The level selected using VOL-
UME Up and Down is shown
numerically in the display.
MUTE turns sound off without
using the volume controls.
ON/STANDBY turns the pream-
plifier on or activates Standby
mode. The red Gryphon logo in
the display remains illuminated
when the preamplifier is in
standby.
MONITOR is used to listen to a
tape recorder. If the recorder
has a source/monitor function,
this switch may be used to lis-
ten to the tape as it is being
recorded.
Use INPUT Up or Down to
select the source which you
wish to hear. The source select-
ed will be shown in the display.
11