Special keyboard features, Special keyboard features –4, Do not transmit foh break code – GoDEX GS220 User Manual
Page 65: Do not transmit cleanup bit, Enable alt-mode (normal), Enable alt-mode (advanced)
1
0–4
Special Keyboard Features
³
1
1
6
3
1
1
Transmit Make Code Only
– Not available on
all models.
³
1
1
6
3
0
1
* Transmit Make/Break Code
– Not available on
all models.
³
1
1
6
3
1
0
* Transmit FOH Break Code
– The scanner will
transmit the FOH in the break-code sequence.
³
1
1
6
3
0
0
Do Not Transmit FOH Break Code
³
1
1
6
3
1
5
Transmit Cleanup Bit
– Use for certain NEC
computers.
³
1
1
6
3
0
5
* Do Not Transmit Cleanup Bit
³
1
1
6
2
1
7
Enable Alt-Mode
– See
Enable ALT-Mode
(Normal) for description.
³
1
1
6
2
0
7
* Disable Alt-Mode
– Caution: If host software
application uses the right Alt key as a “Hot” key,
Alt-mode must be disabled.
† These settings only apply if the Alt-Mode (shown above) is enabled.
³
1
1
6
7
0
6
* Enable Alt-Mode (Normal)
†
The scanner will duplicate the following keyboard
sequence;
Hold down the Alt key and Type the
three
digit decimal number that corresponds to
the appropriate character
.
³
1
1
6
7
1
6
Enable Alt-Mode (Advanced)
†
The scanner will duplicate the following keyboard
sequence;
Hold down the Alt key and Type the
four digit decimal number that corresponds to the
appropriate character
.