Host scanner commands, Host scanner commands –8, Disable d/e disable – GoDEX GS220 User Manual
Page 37: No z/r type d/e simulation, Disable f/l laser command, Do not activate on dc2 character
6–8
Host Scanner Commands
³
1
1
8
0
1
5
Enable D/E Disable Command
– The scanner
will disable scanning after it receives an ASCII
“D” from the host device. It will enable scanning
when it receives an ASCII “E”.
³
1
1
8
0
0
5
* Disable D/E Disable.
³
1
1
8
2
1
1
Enable Z/R Type D/E Simulation
– The scanner
will disable scanning after it receives an ASCII
“Z” from the host device. It will enable scanning
when it receives an ASCII “R”.
³
1
1
8
2
0
1
* No Z/R Type D/E Simulation
³
1
1
8
0
1
4
Enable F/L Laser Command
– The scanner will
turn
off the laser after the scanner receives an
ASCII “F” character. The laser will turn
on after it
receives an ASCII “L” character.
³
1
1
8
0
0
4
* Disable F/L Laser Command
³
1
1
8
1
1
5
Use DTR Scan Disable
– The scanner will
monitor the DTR input to determine if scanning
should be allowed. A +12V active level enables
decoding. A -12V inactive level disables decoding.
³
1
1
8
1
0
5
* Do Not Use DTR Scan Disable
– Do not monitor
the DTR input.
³
1
1
8
1
1
0
Activate DC2 Character
– Scanning will be
initiated with the receipt of a DC2 character
(^R, 124).
³
1
1
8
1
0
0
* Do Not Activate on DC2 Character