Go Power! GP-3000HD - Manual (Page 19)

Go Power! Modified Sine Wave Inverter
Owner’s Manual
www.gpelectric.com 19
9.0 RV Supplement
9.1 Installing the GP-3000HD Without an Automatic Transfer
Switch
Plug main power cord into inverter (a 15 amp adapter may be required).
Battery inter-connects should be a minimum of 4 gauge.
Ensure converter is turned Off when plugging into inverter.
To avoid hidden loads turn inverter off when power is not required.
9.2 Installing the GP-3000HD With an Automatic Transfer Switch
Battery inter-connects should be a minimum of 4 gauge.
Ensure converter is turned Off when inverter is operating.
To avoid hidden loads turn inverter off when power is not required.
*DC connections – use appropriate GP DC Install Kit.
12 V Batteries
On/Off Remote
(Optional)
Shore Power Cord
Go
Power!
Transfer
Switch
Converter
RV Power
GP-
3000HD
Go
Power!
Fuse
Go Power!
Fuse
Remote On/Off (Optional)
AC to GP
Plug Inverter
12V Batteries
GP-
3000HD