Delta 36-978 - Manual (Page 7)

7 7
1. Dust collector
2. Hose
3. Dust
bag
4. Exhaust flange
5. Exhaust flange gasket
6. Intake
funnel
7. Intake support angle brace
8. Upper
support bracket
9. Lower tube support
10. Casters (4)
11. Lower tube support clamps (2)
12. Adjustable locking lever
13. Hose clamps (2)
14. 5/16-18x5/8" Button head carriage bolt (2)
15. 5/16" Lockwasher
16. 5/16-18 Flange hex nut (6)
17. 5/16-18x5/8" Hex head screw (4)
18. Intake cap
19. M8.4 Flat washer
20. 3/8-16 Flange Hex nut (4)
6
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from
all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone,
gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household
floor paste wax.
CARTON CONTENTS
FOREWORD
The Delta Model AP300 is a portable single stage dust collector.
FUNCTIONAL DESCRIPTION
NOTICE: The photo on the manual cover illustrates the current production model. All other illustrations contained in the
manual are representative only and may not depict the actual labeling or accessories included. These are intended to
illustrate technique only.
2
3
1
4
5
18
8
7
9
12
18
14 15 16 17
13 10
20 19