Delta 36-978 - Manual (Page 12)

12 12
MACHINE USE
This versatile dust collector is light, compact. It can
easily be transported for use in and out of the workshop.
The dust collector can be used with many different types
of woodworking machinery.
Fig. 22 illustrates the dust collector used with a router.
Note that the intake port has been adjusted to collect
dust created by the router.
Fig. 23 illustrates the dust collector used with a table saw.
Note that the intake port is removed from the lower tube
support. The intake funnel can be clamped to a tool.
Fig. 24 illustrates the dust collector used with a drum
sander that is equipped with a dust removal port. You
can connect the 4" hose directly to the dust removal
port.
Fig. 23
Fig. 24
TRANSPORTATION AND STORAGE
1. The dust collector features a convenient carrying handle with rubber grip (A) Fig. 25, which allows the unit to be
carried easily from one job area to another.
IMPORTANT: The dust collector weighs approximately 46 lbs. Take care when you lift or transport this unit.
2. In addition to the carrying handle, the machine features a storage mounting bracket (B) Fig. 26 with a hole for
mounting the dust collector to a wall or wooden support when not in use.
Fig. 25
Fig. 26
A
A
Fig. 22
TROUBLESHOOTING
For assistance with your machine, visit our website at www.deltamachinery.com for a list of service centers or call the
DELTA Machinery help line at 1-800-223-7278 (In Canada call 1-800-463-3582).