beautypg.com

How to use your appliance, Filling tap – Glow-worm Flexicom cx User Manual

Page 13

background image

0020127401_00 - 06/11 - Glow-worm

HOW TO USE YOUR APPLIANCE

- 13 -

Filling Tap

Filling Tap

CODE DESCRIPTION

POSSIBLE CAUSES

F1

Boiler has attempted to

light 5 times and failed on

all occassions

Press the reset button.

If the fault persists, contact your Installation/Servicing

company or Glow-worm

F5

Overheat

Boiler has overheated - allow to cool then press reset button

F22

Low water pressure or

ignition temperature rise

too slow

Not enough water in the system.

Connect the filling loop under the boiler and open both filling

taps. When 1.0bar is shown on the display, close taps and

remove filling loop.

If the fault persists, contact your Installation/Servicing

company or Glow-worm