Glow-worm Climapro2 RF - Manual (Page 20)

0020094585_01 - 08/10 - Glow-worm - 18 -
HOW TO USE YOUR CLIMAPRO
2
RF
6.9.3 Programming cooling
Factory setting:
Monday to Friday
Nº of time
slot
Start End Activate
1 00:00 08:30 OFF
2 08:30 22:00 ON
3 22:00 00:00 OFF
Saturday
Nº of time
slot
Start End Activate
1 00:00 08:30 OFF
2 08:30 22:00 ON
3 22:00 00:00 OFF
Sunday
Nº of time
slot
Start End Activate
1 00:00 08:30 OFF
2 08:30 22:00 ON
3 22:00 00:00 OFF
• Press the button and select >
cooling> program > define > choose
a day on the screen.
To set an operating time slot:
Programming for a day begins at 00:00 with a
maximum of 7 time intervals over 24 hours.
• Activate or deactivate the cooling with
the buttons and validate with
button .
• Define the end of the time interval with
the buttons and validate with the
button.
• Begin the programming operations
again if you wish to add other time
intervals.
To modify a setting:
• Use the buttons (go back) or
(go forward) to highlight the
setting in question.
• Change the cooling setting or a time by
pressing buttons and validate with
the button.
To delete a time interval:
Deletion is performed:
- time interval by time interval,
- from the last time interval to the first.
• Use the button to highlight the
last time interval that was set.
• Use the button to display .
The display automatically goes to
and deletes the programmed setting.