Glow-worm Climapro2 RF - Manual (Page 13)

0020094585_01 - 08/10 - Glow-worm - 11 -
HOW TO USE YOUR CLIMAPRO
2
RF
To set an operating time slot:
Programming for a day begins at 00:00 with a
maximum of 7 time intervals over 24 hours.
• Increase or reduce with the
buttons to display the desired ambient
temperature setting and validate with
button .
• Define the end of the time interval with
the buttons and validate with the
button.
• Begin the programming operations
again if you wish to add other time
intervals.
To modify a setting:
• Use the buttons (go back) or
(go forward) to highlight the
setting in question.
• Modify a temperature or a time with
the buttons and validate with the
button.
To delete a time interval:
Deletion is performed:
- time interval by time interval,
- from the last time interval to the first.
• Use the button to highlight the
last time interval that was set.
• Use the button to display .
The display automatically goes to
and deletes the programmed temperature.
The setting for the previous time interval
then applies up to .
• Validate with the button or
delete another time interval.
To delete another time interval:
• Use the button to highlight the
previous time interval and perform the
action again.
Copy a day
This allows you to copy a program from
one day to other days.
This allows the selected day to be copied:
- to a day of the week
- to weekdays (Monday to Friday)
- to a full week (Monday-Sunday).
Once a day has been programmed, you
are automatically returned to the selection
screen of the day to be programmed.
• Select the function (copy a day) and
press the button to confirm.