beautypg.com

Rp-x – Generalmusic RP-X User Manual

Page 9

background image

Page 5

owners manual

rp-x

r p - x

r p - x

THE DEFAULT PERFORMANCE MODE

After powering up the rp-x, the instrument defaults to the PERFORMANCE mode. The LED of the relative
button on the panel will illuminate. The rp-x is now ready to be played.

The Performance mode consist of a complete set of parameters including sounds, volume, transpose, tuning, reverb, efx,
etc. And up to four multi-timbral PARTS.

The PERFORMANCE (PERF) mode is the rp-x main operating level to play and perform. This mode allows
you to program and recall in real time, up to 99 different set ups.

The data stored in the PERF mode is memorized when the instrument is powered off.

The rp-x comes with a complete set of pre-programmed performances. These performance are designed to
highlight the sound and power of this instrument.

Severeal of the factory programmed performances utilize Split or Layer mode. In order to hear all PARTS used
in any of the factory programmed Split or Layered performances, your MIDI master controller must be assegned
to transmit on MIDI channel 1. See ahead for further details in the chapter named MIDI COMMON Channel.

START THE

rp-x

LISTEN TO THE DEMO SEQUENCE

For a complete listing of the factory programmed Performances, please refer to page 17 of this owner’s
manual.

Once the rp-x module is connected to your controller, it's possible to use it, in the
way you prefer.

Use the ON/OFF button on the front panel to switch on the module.

The rp-x has an internal DEMO sequence demonstrating the musical quality & power
of the instrument. Press the two DATA ENTRY buttons on the panel at the same time
in order to start the DEMO. The display show the message “DE1” (Demo 1).

Playing the DEMO. Adjust the instrument output VOLUME, by rotating the VOLUME
knob on the panel.

The DEMO sequence contains various songs from different musical
styles. During playback it’s possible to select each demo song, by simply
pressing the DATA button. The display will indicate the number of
the selected DEMO song. In the normal DEMO mode, all the songs will
be played in chain.

You can exit The DEMO mode by pressing the PERF button on the panel. The
module will return the default mode.