Rp-x, Edit the performance, Owners manual – Generalmusic RP-X User Manual
Page 11

Page 7
owners manual
rp-x
r p - x
r p - x
r p - x
r p - x
r p - x
EDIT THE PERFORMANCE
In the rp-x it's possible quickly modify (edit) the factory pre programmed performance according to your
needs. The PERFORMANCE mode possesses a very important feature, it’s possible to store (and recall), in
the instrument memory 99 different settings, which are retained in the modules memory after turning off
the instrument.
Press the EDIT button on the panel to enter the
PERF edit mode.
The PART (CH) parameter is automatically selected, mean-
while its current value it's visualized in the display
NOTE
Modifying any parameters value, the PERF LED
on the panel start blinking, visualizing the edit-
ing status.
1
1
2
2
In the rp-x it is possible to select 4 different parts, corresponding to the MIDI channel #01, #02, #03, # 04.
SELECTING THE PART (CH)
SELECTING THE PART (CH)
Press repeatedly the DATA button, the display will
show the PART (CH) number you wish to edit
The parameter set directly available from the panel of the rp-x module is a reduced set than available in the instrument, (this is due to the
simplifi ed navigation system used in the module). The best way to fully edit the rp-x performance is to use the PC EDITOR software included
in the package. This software allows you to easily create or edit all kinds of performances!
Once all the 4 MIDI channel have been selected, the
display will show the message ALL. This condition allows
you to modify some parameters values at the same time,
speeding up the editing operation. See ahead for further
details.