EXFO FTB-2 - Manual (Page 2)

P/N: 1066920 July 2014 2/6
C
AUTION
Electrostatic discharge (ESD) damage can cause complete or
intermittent equipment failures.

Always use an ESD-preventive wrist or ankle strap when
handling the power meter. Ensure that the antistatic strap
makes good skin contact and that the end of its wire is
grounded properly.

Always handle the power meter by the edges of its metal
faceplate (where the detector port is located).

Never touch the circuit board.

Keep any piece of clothing away from the power meter during
the handling.

Never touch any component inside the unit either with tools or
your fingers.
 Only place the power meter on antistatic surfaces such as an
antistatic mat, and quickly put power meters that need
recalibration into antistatic bags.
C
AUTION
Use only power meters and VFL designed for your unit and
approved by EXFO.