ENMET PID-Guard - Manual (Page 19)

PID-G UARD ENMET Corporation
17
6.0 Replacement Parts
ENMET replacement part numbers:
Description of Part Part Number
Sensor PID 03028-000
Calibration Regulator, for 17 liter, cylinder 03700-500
Zero Gas, 20.9% O2, 17 liter 03296-209
Sampling Regulator w/hose, quick disconnect 03412-003
Sampling Hose w/quick disconnect 03412-004
Horn 62013-007
Calibration Gas, Consult ENMET Distributor or ENMET Corp.
7.0 Technical Data and Specifications
15 Amp fused branch circuit
100-240
V AC
0.45A, 50/60 Hz
Electrical Power
0.6A, 24 V DC
Temperature: -20
°
to +60
°
C (-4
°
to +140
°
F)
preferred 0
°
to +20
°
C (32
°
to 68
°
F)
Relative Humidity 10-99% RH, non-condensing
Atmospheric Pressure 20 to 36 inHg (68 to 133 kPa)
Storage and Transport
Temperature: 0
°
to +40
°
C (32
°
to +104
°
F)
Relative Humidity 10-99% RH, non-condensing
Atmospheric Pressure 20 to 36 inHg (68 to 133 kPa)
Operation
Dimensions: 7.1 x 5.1 x 3 in(180x130x75mm)
Weight: 2 lbs (0.9 kg)
Material: Polycarbonate
Strain relief: 3-6.5mm OD
Mechanical
Relays: SPDT
Resistive Load
Inductive Load
10A at 110 V AC 7.5A at 110 V AC
10A at 30 V DC 5A at 30 V DC
Analog: 4-20mA
Digital: RS-485-modbus
Audio: 105 dB at 30cm/12in
Outputs
N OTE : All specifications stated in this manual may change without notice.