Dayton 3VH20 - Manual (Page 6)

Dayton Operating Instructions and Parts Manual
6
Dayton Propane
Construction Heater ®
3VH20
Replacement Parts List
For Replacement Parts, call 1-800-323-0620
24 hours a day - 365 days a year
Please provide following information:
- Model number
- Serial number (if any)
- Part description and number as shown in
parts list
Address parts correspondence to:
Grainger Parts
P.O. Box 3074
1657 Shermer Road
Northbrook, IL 60065-3074 U.S.A.
1 Shell Assembly 101880-01 1
2 *Thermocouple Bracket 103933-01 1
3 Thermocouple Kit 099236-01 1
4 Burner Assembly Kit (Includs Automatic Control Valve, 101864-01 1
Hardware, and Instruction Sheet)
5 Piezo Ignitor (Includes Nut) 102445-01 1
6 Ignitor 101878-01 1
7 Regulator (Complete With Regulator And Fuel LPA2025 1
Gas Connector)
8 Regulator/Fuel Gas Connector/Hose Assembly LPA3025 1
∆
Operation Tag 101860-07 1
∆ Tradename Decal 099153-07 1
∆ **10’ Hose With Brass Fitting LPA1025 1
Reference
Number
Description Part No. Quantity
( ∆ ) Not shown. (*) NOTE: Attach Thermocouple Bracket with #4-40 Bolt/Nut (Standard Hardware Available Locally).
(**) Total length of hose should not exceed 20 feet from tank/cylinder.
Use only original replacement parts. This heater must use design-specific parts. Do not substitute or use
generic parts. Improper replacement parts could cause serious or fatal injuries. This will also protect
your warranty coverage for parts replaced under warranty.
Figure 7 - Replacement Parts Illustration
1
2
3
5
8
6
4
7