ENMET TARGET - Manual (Page 26)

TARGET Series ENMET Corporation
23
Replacement Sensors:
ENMET Part No. Description
03008-131 Sensor, BRH
for units with s/n 15-2499 and below
03008-012 Sensor, BRH012
for units with s/n 15-2500 and above
03015-012 Sensor, HS+/CO+
03070-002 Sensor, Combustible (HW)
67016-1104 Sensor, Oxygen
for units with s/n 15-1999 and below that have not been modified
67016-1114 Sensor, Oxygen (extended life)
for units with s/n 15-2000 and above
67025-0100 Sensor, Chlorine
67025-0200 Sensor, Hydrogen sulfide
67025-0300 Sensor, Hydrogen cyanide
67025-0400 Sensor, Hydrogen chloride
67025-0500 Sensor, Sulfur dioxide
67025-0800 Sensor, Ozone
67025-0850 Sensor, Chlorine dioxide
67025-1200 Sensor, Carbon monoxide
67025-1202 Sensor, Carbon monoxide / Hydrogen sulfide
67025-1500 Sensor, Hydrogen
67025-1700 Sensor, Nitrogen dioxide
67025-1750 Sensor, Nitric oxide
67025-2400 Sensor, Ammonia
67025-4000 Sensor, Arsine
67025-5200 Sensor, Ethylene oxide
7.2 Target Specifications
Element Specification
Dimensions 6 x 4.5 x 1.7 inches (150 x 115 x 45 mm)
Weight 32 ounces (900 grams)
Operating Temperature 5 F° to 122 F° (-15 C° to 50 C°)
Storage Temperature 122 F° to 140 F° (-30 C° to 60 C°)
Operating Humidity 5 – 99% (non-condensing)
Enclosure Material Aluminum Extrusion and Castings
Approval Rating Approved instruments are identified by the presence of the CSA logo on the
instrument serial number label.
CSA approval for Intrinsic Safety, Class 1, Div 1, Groups A,B,C,D
Power Source Battery Pack: Nickel-Metal Hydride
N OTE : Any specifications stated in this manual may change without notice.