Denon DVD-1800BD User Manual
Page 38
34
ENGLISH
ENGLISH
How to navigate through the “HDMI Multi(LPCM)” and “Multi Channel” setting
1) Use [U / V] to select the menu item.
2) Use [U / V] to select setting items.
• Use [RETURN] to go back to the previous screen.
3) Use [Y / Z] to select desired options.(Except for “Test Tone” and “Default”.)
For “Test Tone”:
Use [Y / Z] to select “Manual” or “Auto”, then press [ENTER].
• The test tone will be output. If you select “Manual”, use [U / V] to select desired speaker, then use
[Y / Z] to adjust the volume. If you select “Auto”, use [Y / Z] to adjust the volume of the speaker
that output the test tone.
• If you want to stop the test tone, press [RETURN].
For “Default”:
Press [ENTER] to reset the “Delay Time” setting to the default.
4) Press [SETUP] to exit.
Menu
Setting items
Options
Descriptions
Speaker Configuration
Select the desired
speaker to set. Then
change the setting
appropriately by
referring to the
descriptions.
Front
Large*
Large:
For the large speakers
with strong low frequency
reproduction capabilities.
Small:
For the small speakers
which do not provide
strong bass sound.
You cannot change the
setting of “Subwoofer”. If
connected device is not
compatible with
subwoofer, “Subwoofer”
will be displayed in gray.
Small
Center
Large*
Small
Subwoofer
On*
Surround
Large*
Small
Surround Back
Large*
Small
Channel Level
Tests or sets the volume
for each speaker.
Test Tone:
“Test Tone” is the
test tone which can
be output from the
speakers so that you
can adjust the
volume for each
speaker.
Off*
Select “Off” to deactivate
the “Test Tone” feature.
Select “Manual”, then
press [ENTER] to manually
set the volume for the
desired speaker.
Select “Auto”, then press
[ENTER] to automatically
output the test tone from
each speaker.
Manual
Auto
Menu
Setting items
Options
Descriptions
Channel Level
Tests or sets the
volume for each
speaker.
Front Lch
0 dB to -12 dB
(0 dB*)
If you have selected
“Manual” in “Test Tone”,
select the desired speaker
to set and adjust the
volume for the selected
speaker.
If you have selected
“Auto” in “Test Tone”, test
tone will be output
automatically in order.
Adjust the volume of the
speaker that output the
test tone.
Center
0 dB to -12 dB
(0 dB*)
Front Rch
0 dB to -12 dB
(0 dB*)
Surround Rch
0 dB to -12 dB
(0 dB*)
Surround Back Rch
0 dB to -12 dB
(0 dB*)
Surround Back Lch
0 dB to -12 dB
(0 dB*)
Surround Lch
0 dB to -12 dB
(0 dB*)
Subwoofer
0 dB to -12 dB
(0 dB*)
Delay Time
This is a parameter for
optimizing the timing
at which the sound is
output from the
speakers according to
their distance from
the listening position.
Distance
Feet*
Set the desired measure
system. This measure
system will be used for
“Delay Time” setting. Press
[ENTER] to switch the
setting.
Meters
E5H60UD_EN.book Page 34 Thursday, August 21, 2008 1:54 PM