Part names and functions, Front panel rear panel – Denon DVD-1800BD User Manual

Page 11

ENGLISH

The unit can also be turned on by pressing the buttons with circled numbers.

Part Names and Functions

Front Panel

4 5 6

1. Power indicator

This indicator lights up in red in standby
mode and turns off when the power is on.

2. ON/STANDBY button

Press to turn the unit on or to standby.

3. OPEN/CLOSE A button

Press to open or close the disc tray.

4. PLAY B button

Press to start or resume playback.

5. STOP C button

Press to stop playback.

6. PAUSE F button

Press to pause playback.

7. SD CARD slot

Insert an SD Memory Card, and play back the
contents in it.

8. Infrared sensor window

Receives signals from your remote control so
that you can control the unit from a distance.

9. Display

Refer to “Front Panel Display” on page 9.

10. Disc tray

Place a disc when opening the disc tray.

Rear Panel

1. VIDEO OUT jack

Use an RCA video cable to connect to a TV
monitor, AV receiver or other device.

2. COMPONENT VIDEO OUT jacks

Use a component video cable to connect to
a display device with component input jacks.

3. HDMI OUT jack

Use an HDMI cable to connect to a display
with an HDMI input jack.

4. AUDIO OUT jacks

Use an RCA audio cable to connect these
jacks to the audio input jacks of your
amplifier with input terminals.

5. DIGITAL OUT (COAXIAL) jack

Use digital audio coaxial cable to connect to
an AV receiver, Dolby Digital decoder or
other device with a digital audio coaxial
input jack.

6. AC IN Terminal

Use to connect the AC cord to supply the
power.

Note

• Do not touch the inner pins of the jacks on

the rear panel. Electrostatic discharge may
cause permanent damage to the unit.

E5H60UD_EN.book Page 7 Thursday, August 21, 2008 1:54 PM