ENMET RECON/4 - Manual (Page 4)

RECON/4 ENMET Corporation
2
2.0 Features
2.1 RECON/4 elements
See Figure 1 for location of features:
I TEM F EATURE D ESCRIPTION
1
Visual Alarm Red indicators clearly visible on 3 sides and located at the tip of the RECON/4.
LED’s activate when alarm thresholds are exceeded.
2
Display The color Liquid Crystal Display (LCD) allows messages to be read clearly
Time and Battery status indications, See Section 2.2 for features.
Quadrant Color coded for displaying data for each gas
3
Audio Alarm Loud buzzer located on the front of the RECON/4
The audio alarm (buzzer) is on when the unit is in alarm.
4 Pushbutton To turn the RECON/4 Power On/Off, See Section 2.3 for functions.
5 Input Port Calibration gas input port.
6 Sensors Detection area
7 D-Ring Attached to alligator clip
8 Alligator-Type Clip To clip to outside of clothing for hands-free operation
9 Belt Clip To clip to belt or pocket for hands-free operation
10 Label Instrument serial number and gases
11 Port Socket connection for battery charger or computer connection
Figure 1: RECON/4 Features