EMM Labs TSD1 CD/SACD TRANSPORT User Manual
Page 15

015
Appendix A - Serial Remote Control (RS232)
© 2010 EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
TSD1 CD/SACD TRANSPORT OWNER’S MANUAL
Serial Remote Control (RS232)
The TSD1 is equipped with a 9-pin RS232 port for system remote control via a serial cable
(not provided by EMM Labs). Please use a standard RS232 cable. Do not use a null model
cable, as this will not work. RS232 communication port settings:
• 19,200 baud
• 8 bits
• 1 stop bit
• no flow control
• no parity bit
Commands to the TSD1
All commands sent to the TSD1 consist of 3 ASCII characters (all lowercase) followed by a
carraige return or
commands are not stored in a stack. They need to be sent in intervals of at least 50ms to
allow enough time for the TSD1 to execute a command before receiving the next one.
Command
Function
ply
Start Playback
pse
Pause Playback
stp
Stop Playback
mod
Toggles through the SACD playback layers. Only works when not playing.
rpt
Toggles through the different repeat modes
nxt
Jumps ahead a track
prv
Jumps back a track