EMM Labs XDS1 User Manual

Page 21

021

Appendix A - Serial Remote Control (RS232)

XDS1 V2 CD/SACD PLAYER OWNER’S MANUAL

Status bytes sent from XDS1 V2 (cont`d)

Byte 5 Track number ones in ASCII

Byte 6 Track number tens in ASCII

Bytes 7 through 9 are status bytes where each bit represents a machine status flag. 0 indicates

that the particular bit is set.

Byte 7

bit 0 - 1 when "Reading" indicator is on (front panel)

bit 1 - 1 when "Repeat Track" indicator is on( front panel)

bit 2 - 1 when "Repeat All" indicator is on (front panel)

bit 3 - 1 when "CD" indicator is on (front panel)

bit 4 - 1 when "SACD 2CH" indicator is on (front panel)

bit 5 - 1 when "SACD MCH" indicator is on (front panel)

bit 6 - Not used

bit 7 - Not used

Byte 8

bit 0 - Reserved

bit 1 - Not used

bit 2 - Not used

bit 3 - 1 when "No Disc" indicator is on (front panel)

bit 4 - 1 when internal clock selected

bit 5 - Not used

bit 6 - 1 when in pause

bit 7 - 1 when clock is locked

Byte 9 (x0D)