EMM Labs XDS1 - Manual (Page 15)

015 Rear Panel & Functions
Connecting & Operation
USB Audio Input:
1. First, use only well-sheilded certified USB 2.0* cables to connect the XDS1 V2’s USB
Audio input to any USB digital audio source component (computer, laptop, media
server etc.)
2. The XDS1 V2’s USB Audio interface uses the B-type USB connector similar to
connectors used on printers. Please see image below:
3. Select the USB Audio input using front panel input selector buttons.
4. For MAC OSX systems, no driver is needed. OSX has the appropriate USB driver
already installed.
5. For Windows XP, Vista (32 or 64bit) and Windows 7 (32 or 64bit) systems install the
provided USB driver located on the software CD in folder named “XDS1 V2 USB
Audio Driver” and run the “setup.exe” file. Read and follow the installation
instructions.
6. Kernal, ASIO and WASAPI (Vista and Windows 7) drivers will be installed.
*Not using proper cables will cause audio issues between digital source and DAC.
© 2013 EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
XDS1 V2 CD/SACD PLAYER OWNER’S MANUAL