EmberGlo ES10 - Manual

Installation Service
Manual
EmberGlo Model ES10
EmberGlo
A Division of Midco International Inc.
4140 West Victoria Street
Chicago, Illinois 60646
tel 866.705.0515
fax 866.580.8700
web www.emberglo.com
Quality Designed for Proven Performance
210
8470 77
Printed USA
SAFETY INFORMATION TERMS: The following terms are used to identify hazards, safety precautions or
special notations and have standard meanings throughout this manual. When you see the safety alert symbol
and one of the safety information terms, as shown below, be aware of the hazard potential.
DANGER: Identifies the most serious hazards which will result in sever personal injury or death.
WARNING: Signifies hazards that could result in personal injury or death.
CAUTION: Identifies unsafe practices which would result in minor personal injury or product and
property damage.
Full Pan Size Food Steamers
A u t o m a t i c , P r o g r a m a b l e Ti m e r O p e r a t i o n
D e s i g n e d t o O p e r a t e Wi t h o u t D i s t i l l e d Wa t e r
ES10PB: Manual Push Button
ES10TE: Automatic, Programmable Timer
Operation-External Cycle Timer
Midco International Inc Warranty Policy
Exclusions Terms, Customer Requirements and Instructions
Warranty
Only Authorized Service Providers are authorized to provide Warranty service on
all EmberGlo, a Division of Micdo International Inc., food equipment as described
under and Midco
® International Warranty Policy. A list of providers can be found on
our web site: www.emberglo.com
Provisions:
In lieu of an implied warranty, all repairs and replacement parts furnished under
our Warranty shall be f.o.b. point of distribution, but the owner must pay the
necessary freight, delivery and labor costs involved when required. Any Federal,
State or Local taxes are also extra. This Warranty is effective for a period of 1
(one) Year from the date of original installation. EmberGlo
® Electric Food
Preparation Equipment manufactured by Midco International, sold under the
EmberGlo trademark, are guaranteed to be free from defect in material and
workmanship under normal use and service for a period of 1 (one) year after the
date of original installation. Midco's obligation under this Warranty Policy shall be
limited to repairing or replacing, at our option, any part of said equipment which
Midco examination shall disclose to its satisfaction to be thus defective.
Exclusions:
This Warranty Policy does not apply to damages resulting from accident, misuse,
abuse or alteration, nor does it apply to limed steam generators, nor does it apply
to any consequential damages. Most geographical areas require the use of
distilled or demineralized water. Tap water is permissible only with ES Series
Steamers. Midco's obligation will be the replacement of the product or parts
removed.
Terms:
Under the terms of this Warranty Policy, models considered portable (devices with
cords and plug caps such as EmberGlo Steamers) must be taken or returned to
the nearest service provider, transportation prepaid, returned transportation
collect. Non-portable units with permanent wiring will be serviced on the
customer's premises. Under these terms, Midco agrees, within the terms of this
Warranty period, to make all repairs at no charge by the authorized service
provider. Labor and mileage charges submitted by any other provider not
authorized will be the responsibility of the customer.
If a part is defective due to workmanship or materials and is removed from the
product within the applicable warranty period and returned to Midco in accordance
with the following procedure described, Midco will, at its option, either repair or
replace the part. Call the factory for Instructions on returned goods.
No equipment may be returned without written authorization from MIDCO.
Returned goods must be shipped prepaid to the factory.
__________________________________
No Hood Installation Required: According to the Uniform Mechanical
Codes per the International Conference of Building Officials Code EmberGlo
Steamers do not require a separate hood for vapor produced during
operation.
NOTE: EmberGlo ES10 Series Steamers use a cast aluminum steam
generator with two cast in electric heating elements. For best steaming, the
generator casting should contain some mineral deposits. During final
inspection each generator casting is pre-seasoned with a solution of baking
soda and water. The water marks and mineral deposits seen on a new
generator casting when the perforated food pan is removed is your
assurance that the unit has passed final inspection test and will readily
produce steam.
Specifications:
- 240 volts 60HZ AC 3200 watts 13.3 amp
or 208V 60HZ AC 2400 watts 11.6 amps
- Automatic timer operation (timer models only)
- Single shot operation
- End of cycle buzzer (10 seconds)