Electrocompaniet PD 1 - Manual (Page 5)

5
Technical specifications PD 1
The following technical data were measured on randomized test objects
and are typical data.
All measurements are made at 120V / 240V // 50Hz / 60Hz
Measurements
No. of channels..................................................................2
Output impedance....................................................100 ohm
Output level (Balanced 0dBFs).....................................3.4Vrms
Output level (Single ended 0dBFs)................................1.7Vrms
Noise floor (20 - 20 kHz)........................................< - 140 dB
Frequency response................................................1 – 48 kHz
Analog filter response..................................2 pole linear phase
THD + N (20 - 20 kHz)............................................< 0.003%
Upsampling rate (All inputs)............................. 192 kHz, 24 bit
Digital/Analog conversion (All inputs)................192 kHz, 24 bit
Input sampling rate supported:
SPDIF.........................................192 kHz, 24 bit
USB.............................................48 kHz, 16 bit
RF................................................48 kHz, 16 bit
Digital Inputs:
2 x SPDIF Coax
1 x SPDIF TOSLink
1 x USB type 2
1 x RF link
Audio Outputs:
Stereo balanced line out (XLR)
Stereo single-ended line out (RCA)
Power consumption
35 W, stand-by 0,2 W.
Dimensions
Width 420 mm
Depth 340 mm
Height 50 mm
Weight 4,3 kg
Specifications subject to change without further notice.
ENG
PD1DAC_Manual_R1.indd 5 25.10.2010 12:19:14