beautypg.com

4using the remote control, Navigator buttons, Volume – Electrocompaniet PD 1 User Manual

Page 4: Replacing remote control batteries

background image

4

Using the remote control

The PD 1 can also be controlled by using the remote control.

The function of the buttons are as follows – see illustration 3( page 15).

1. Mute

– to mute the PD 1 on/off

2. Standby

– to put the PD 1 in /out of standby mode

3. Play

– used in the playlist to start playing

4. Pause

– used in the playlist to pause the playlist

5. Stop

– used in the playlist to stop playing

6. Previous track

– jump to go to the previous track in the playlist

7. Dim

– to dim the display in 3 steps; full, dimmed, off. When PD 1 is

operated the indicators will be set to full brightness for 5 seconds and
then retuned to the previous setting.
8. Next track

– jump to the next track in the playlist

9. Double arrow left

– for future use

10. Double arrow right

– for future use

Navigator buttons

These buttons corresponds to the navigator buttons on the front panel

and lets you select source and adjust the volume. Use the up and down

buttons to adjust the volume, use the left and right buttons to select the

input source. The selected source is indicated on the front panel.

Volume

11. Down

- Press to decrease the volume. The level is indicated on the front panel

12. Up

– Press to increase the volume, the level is indicated on the front panel.

Replacing remote control batteries

To replace the batteries, lift the cover off, and insert a fresh set of batteries.

Be careful to follow the + and - polarity indications at the bottom of

the battery compartment. Battery type: 2 x LR03 / AAA: 1.5V.

ENG

PD1DAC_Manual_R1.indd 4

25.10.2010 12:19:13