Electrocompaniet PD 1 - Manual (Page 3)

3
How to connect your system
See illustration 1, page 14 (back panel).
Inputs
Coax
There are two SPDIF Coax inputs - labelled Coax 1 and Coax 2. When
selected indicators Coax1 or Coax 2 will light up on the frontpanel.
Toslink
There is one TOSLink input- labelled TOSLink. When selected indicator
Tlink will light up on the frontpanel.
USB
TThere is one USB type 2 input – labelled USB. When selected indicator
USB will light up on the frontpanel.
RF
There is one RF input – labelled RF Link, this works with the
Electrocompaniet EMS 1 Music Streamer (optional). When selected indi-
cator RF will light up on the frontpanel. PD 1 will remain muted until a
link is established with the EMS 1.
Outputs
XLR
There is one balanced XLR stereo output.
RCA
There is one single ended RCA stereo output.
Front panel
See illustration 2, page 14 (front panel)
The front panel shows which source is playing and the volume is indi-
cated. It is also equipped with 5 touch buttons.
The standby button is located on the left side of the front panel.
The four buttons on the right-hand side of the front panel is used to adjust
the volume and select the input source.
Use the up and down buttons to adjust the volume, and the left and right
buttons to select input source.
ENG
PD1DAC_Manual_R1.indd 3 25.10.2010 12:19:13