Electrocompaniet PI 2D - Manual (Page 7)

7
ENG
1. Mute on/off.
(Hold 1-2 sec to set into standby mode.)
2. CD - switch to CD input.
3. TUN - switch to Tuner input.
4. COAX1 - switch to COAX1 input.
5. TOSLink 1 - switch to TOSLink 1 input.
6. COAX2 - switch to COAX2 input.
7. TOSLink 2 - switch to TOSLink 2 input.
8. USB - switch to USB input.
9. AUX - switch to AUX input.
10. No function on PI 2D.
11. AMP DIM - turn display on/off.
12. DVD - switch to DVD/Blu-ray input.
13. Vol Up - increases the volume level.
14. Vol Down - decreases the volume level.
15. HT - switch to Home theater input.
Important Notice
For optimal sonic performance, the PI 2D should be burned in for a
minimum time of 72 hours. If the PI 2D has been switched off, allow two
hours of warm-up for optimal sonic performance. It is normal for the
PI 2D to feel warm. A good rule of thumb is to allow at least 3 - 5 cm
(1 - 2 inches) of air sidewise, and 5 - 8 cm(2 - 3 inches) above the PI 2D
If service is needed
Your dealer will have all relevant information regarding the service
centre in your area and will ensure that your unit is serviced with mini-
mum delay. If, for some reason, there are no service facilities available
in your country, please contact Electrocompaniet for assistance:
ELECTROCOMPANIET AS
BREIVIKVEIEN 7
4120 TAU
NORWAY
Web: www.electrocompaniet.no
The end-user is responsible for all shipping charges, insurance and all
re-importation and duty charges. When shipping a product to the fac-
tory for service, always include the following:
1. A sales slip or other proof of purchase if repair is claimed under warranty.
2. A proforma invoice with value of goods, stating that the amplifier is
being returned to Norway for repair.
3. An accompanying letter describing faults, symptoms, or problems with
the unit.
4. Always ship the unit in its original carton and packaging material
to prevent damage in transit. Electrocompaniet will not cover damages
incurred in transit.
If you require further information concerning the operation of the unit or
if you have any questions related to service, please do not hesitate to
contact your dealer or national distributor.