Electrocompaniet PI 2D - Manual (Page 4)

4
ENG
This window in the middle of the front panel shows which source is currently
active. The listening volume will be displayed when the volume is adjusted
using the remote control or the navigator up/down buttons. The display may
be turned off using the DIM AMP button on the remote. If turned off, the dis-
play will come back on for 5 seconds if any button is pressed on the remote
or the navigator.
Audio
Source
Display
Text
Description
CD CD Analog balanced XLR input
AUX AUX Analog single-ended RCA input
DVD DVD Analog single-ended RCA input
HT HT Analog single-ended home theater RCA input
COAX 1 COAX1 Coaxial S/PDIF input up to 192 kHz/24 bit
COAX 2 COAX2 Coaxial S/PDIF input up to 192 kHz/24 bit
TosLink 1 TOSLNK1 Optical S/PDIF input up to 96 kHz/24 bit
TosLink 2 TOSLNK2 Optical S/PDIF input up to 96 kHz/24 bit
Tuner TUNER Analog single-ended RCA input
USB USB Asynchronous High Speed USB 2.0 input up to
192kHz/24bit
Navigator buttons (
See illustration "front panel", page 8.)
Button Function Description
UP Volume Up Increases the volume level.
DOWN Volume Down Decreases the volume level.
LEFT Select source left Selects previous source
RIGHT Select source right Selects next source
Navigator window (
See illustration "front panel", page 8.)