Electrocompaniet PI 2D - Manual (Page 5)

5
ENG
Error codes
If the PI 2D is not working properly, the display will show an error code.
For other troubleshooting please contact your local dealer or our support
department. All contact information you will find at www.electrocompaniet.no
Error text Description What to do
DC L DC voltage left channel Please contact service center.
DC R DC voltage right
channel
DC DC left + right channels
OVRLD L Overload left channel
Make sure that the + and – leads
of the loudspeaker cables are
not shorted, and that the speaker
cables are not in contact with the
chassis of PI 2D.
OVRLD R Overload right channel
OVRLOAD Overload left+right chan-
nels
TEMP L Left channel overheated
The amplifier is overheated. This
is caused by either playing to
loud for a long period of time,
or not enough free space on the
sides or above the PI 2D.
Turn down the volume and make
sure there is enough free space
around the amplifier.
TEMP R Right channel overheated
TEMP Left+Right channels
overheated