Echelon i.LON 600 LonWorks/IP Server - Manual (Page 2)

Create the L ON W ORKS /IP channel using the Configuration
Server
1. Click START|PROGRAMS|Echelon i.LON 600|L ON W ORKS -IP
Configuration Server. The Configuration Server should
automatically detect and display the IP address of your PC.
2. If your network management tool uses LNS ® 3.0x, double-
click New Channel and select Backward Compatible.
3. Add your i.LON 600 device to the L ON W ORKS /IP channel
by right clicking on New Channel in the device tree and
selecting New Device. Enter a name for your i.LON.
4. Double click the entry created in step 3 and enter the IP
address & time zone for your i.LON in the dialog provided.
5. Repeat steps 3 & 4 to add your PC. (The configuration
server treats a PC with a local L ON W ORKS /IP interface in the
same way it treats an i.LON 600.)
6. When all devices have been added to the device tree, right
click on New Channel and select Update Members.
7. Verify that the icons representing i.LON 600 and PC turn
green. If the PC’s icon does not turn green, open the
LonMaker™ tool using the local L
ON W ORKS /IP interface as
the network interface and repeat step 6.
Create a new network using the LonMaker Tool
1. With the configuration server still running in the back-
ground, start the LonMaker tool and create a new network
drawing. (Be sure to select the interface “myvni” that you
created in section 3 as your network interface.)
2
Q u i c k S t a r t G u i d e
Install the i.LON 600 software
1. Insert the i.LON 600 CD into your PC. If the installation
program fails to start, navigate to your CD-ROM drive and
double-click setup.exe.
2. Follow the instructions in the Setup Wizard.
Connect the i.LON 600 hardware directly to your PC
using an Ethernet cable
1. If your PC is not on the 192.168.1.0 subnet, open a DOS
command prompt and issue the following command:
route add 192.168.1.0 mask 255.255.255.0 %computername%
Your PC may also need a static IP address.
2. Open Internet Explorer and enter the following URL:
192.168.1.222 (the i.LON 600 default IP address)
Your PC may also need a static IP address.
3. Click TCP/IP in the Setup menu.
4. Enter ilon in the User Name and ilon in the Password
fields and click OK.
5. Enter a new set of TCP/IP parameters.
6. Click Submit.
7. Reboot your i.LON 600 for the parameters to take effect.
8. Connect the i.LON 600 to your network.
Create a local L ON W ORKS /IP Interface
1. Click Start|Settings|Control Panel|L ON W ORKS /IP Channel
Interface and run the L ON W ORKS /IP Channel Interface
control panel applet.
2. Click the Add button. Enter a name for your PC (note that
the IP address and port have already been filled in for you).
3. Click OK and exit the applet.
1
Using the i.LON 600 as a Network Interface
3
4
5
This quick start is available in video form on the i.LON 600
L
ON W ORKS /IP Server distribution CD under the \VIDEOS subdirectory.
www.echelon.com/ilon
www.echelon.com/support
Install by Qualified
Service Person Only
9600/8/N/1
DB-9
Console Port
Ethernet
10/100 BaseT TP/XF-1250 or TP/FT-10 Channel
(Optional) High Voltage Models
(72601, 72602)
90-240 VAC
Low Voltage Models
(72603, 72604)
24V AC/DC
Hyperterminal
Configuration
Server and/or
LonMaker Tool