Ditch Witch 100SX - Manual (Page 43)

100sx - SPECIFICATIONS 43
BELT TENSION
100sx - SPECIFICATIONS 43
BELT TENSION
Specifications are general and subject to change without notice. If exact
measurements are required, equipment should be weighed and measured. Due to
selected options, delivered equipment may not necessarily match that shown.
POWER TRAIN U.S. METRIC
Transmission: Hydrostatic, infinitely variable forward and reverse, 3:1 chain drive from
motor to axle
Tires: 18 x 11-8, 3-ply
Drive line system: belts and sheaves
Vibratory mechanism: eccentric shaft
HYDRAULIC SYSTEM
Ground drive pump capacity @ 3600 rpm, relief
valve setting @ 2,000 psi 2.2 gpm 8.3 L/min
Ground drive pump displacement/revolution .223 in 3 .556 cm 3
Ground drive motor displacement/revolution 9.6 in 3 157 cm 3
Directional control valve type: open center
Delivery capacity 10 gpm 37.8 L/min
System relief valve setting 2500 psi 17 237 kPa
FLUID CAPACITIES
Fuel tank 1.7 gal 6.5 L
Engine oil 2.3 pt 1.1 L
Hydraulic system 3.5 gal 13.2 L
NOISE LEVELS
Operator 92 dBA sound pressure per ISO 6394
Exterior 101 dBA sound power per ISO 6393
VIBRATION LEVELS
Vibration at the operator’s hand during normal operation is x m/s 2
Specifications are general and subject to change without notice. If exact
measurements are required, equipment should be weighed and measured. Due to
selected options, delivered equipment may not necessarily match that shown.
POWER TRAIN U.S. METRIC
Transmission: Hydrostatic, infinitely variable forward and reverse, 3:1 chain drive from
motor to axle
Tires: 18 x 11-8, 3-ply
Drive line system: belts and sheaves
Vibratory mechanism: eccentric shaft
HYDRAULIC SYSTEM
Ground drive pump capacity @ 3600 rpm, relief
valve setting @ 2,000 psi 2.2 gpm 8.3 L/min
Ground drive pump displacement/revolution .223 in 3 .556 cm 3
Ground drive motor displacement/revolution 9.6 in 3 157 cm 3
Directional control valve type: open center
Delivery capacity 10 gpm 37.8 L/min
System relief valve setting 2500 psi 17 237 kPa
FLUID CAPACITIES
Fuel tank 1.7 gal 6.5 L
Engine oil 2.3 pt 1.1 L
Hydraulic system 3.5 gal 13.2 L
NOISE LEVELS
Operator 92 dBA sound pressure per ISO 6394
Exterior 101 dBA sound power per ISO 6393
VIBRATION LEVELS
Vibration at the operator’s hand during normal operation is x m/s 2