Ditch Witch 100SX - Manual (Page 25)

100sx - OPERATION 25
ATTACH AND REMOVE BLADE
100sx - OPERATION 25
ATTACH AND REMOVE BLADE
ATTACH AND REMOVE BLADE
1. Shut off engine, close fuel shutoff valve, and tip machine for-
ward onto weight assembly.
2. Use two blade pins to position blade mounts onto vibrator
arm.
3. When attaching blade mount to vibrator arm, pin top hole
first. Pivot blade mount to align lower vibrator arm hole with
one of lower blade mount holes. Outer hole gives more
vertical angle for normal plowing. Hole nearer plow gives
steeper blade angle for difficult soil conditions.
4. The plow blade can be adjusted up or down in blade mount.
Always install blade pin in lowest hole possible.
5. To remove blade, remove pins holding blade mount to
vibrator arm.
ATTACH AND REMOVE BLADE
1. Shut off engine, close fuel shutoff valve, and tip machine for-
ward onto weight assembly.
2. Use two blade pins to position blade mounts onto vibrator
arm.
3. When attaching blade mount to vibrator arm, pin top hole
first. Pivot blade mount to align lower vibrator arm hole with
one of lower blade mount holes. Outer hole gives more
vertical angle for normal plowing. Hole nearer plow gives
steeper blade angle for difficult soil conditions.
4. The plow blade can be adjusted up or down in blade mount.
Always install blade pin in lowest hole possible.
5. To remove blade, remove pins holding blade mount to
vibrator arm.