Digiframe DF-SCA401w - Manual (Page 7)

7
The recommended battery is attached (3.7V 1700mAH)
3.2 Charge the battery
Important!
The scanner can be charged either with the Y shape USB
cable connected to your computer, or the dual USB AC
adapter.
Before using the scanner, please first charge the battery
through the supplied Y shape USB cable. When charging the
battery, be sure the scanner is turned off.
To charge the battery:
 Connect the mini end of the supplied Y shape USB cable to
the mini USB connector on the scanner.
 Turn on your computer, and then connect the other two
rectangle ends of the Y shape USB cable to two USB ports
on your computer. Alternatively, you can use the supplied
dual USB AC adapter instead of your computer.
 During the charging process, the battery LED light will be
lit in red. When the battery capacity is full, the battery
LED light is extinguished.
Note: