Digiframe DF-SCA401w - Manual (Page 6)

6
3. Installation & Operation
Precautions
 Keep the product out of direct sunlight. Direct exposure
to the sun or excessive heat may cause damage.
 Do not store/operate the product in humid or dusty
conditions.
 Place the product securely on an even, flat surface. Tilted
or uneven surfaces may cause mechanical or paper-
feeding problems.
 Retain the product box and packing materials for shipping
purposes.
3.1 Install the battery
To install the battery into the scanner:
 Open the battery cover underneath the scanner.
 Remove the plastic tab to connect battery and replace
cover.
 If you need to remove the battery take extra care that the
copper contacts are not bent/damaged when replacing
battery. (This type of damage is not covered under
warranty)
Note: