Digiframe DF-SC6402 - Manual (Page 9)

8
Plastic Sheaths
Use the clear plastic sheath (included) when scanning photos to ensure
the best scanning results. The sheath helps eliminate the possibility of
de-focusing due to the uneven surface of curled photos.
Curled photo
Fuzzy areas that result from the uneven surface of the curled photo
1.
Insert the photo into the plastic sheath as shown below.
2. Insert the plastic sheath, flat and level, into the scanner’s feeding
slot, folded side first, image facing up.
Note:
z Keeping the original flat and level when feeding prevents possible
jamming.
z Keep originals free from finger prints, oil, dirt, and dust for
optimum scanned image quality.
z Remove photos from the plastic sheath after scanning to prevent
the sheath from sticking to the photos over time.
z If the plastic sheaths are not in use, store them in a safe place and
keep them protected from accumulating dust.
3.4 Power off the Scanner
After all originals are scanned, press and hold the power button for
about 2 seconds. Now you can safely disconnect the power and
remove the memory card or flash card from the scanner.