Digiframe DF-SC6402 - Manual (Page 4)

3
1. Introduction
Congratulations on your purchase of a DigiFrame Photo Scanner.
Now you can scan and store your printed photos directly to your
memory card or USB Stick without connecting to any computer.
Simply insert a memory card or USB into the scanner, and power it
on. When the scanner is ready, feed your printed photo into the
scanner and your images will be stored in the memory card or USB. If
you want to store your photos directly into your computer, just plug in
a USB cable and/or use the supplied Scan To PC utility.
Before you install and operate the product, please take a few minutes
to read through this manual. It provides proper instructions for you to
install, operate and maintain the product.