Digiframe DF-SC6402 - Manual (Page 13)

12
5. Scanning To PC Manager
With the Scan To PC Manager, you can easily scan photos and save the
scanned images directly to the connected PC. You can also choose the
location where the scanned images will be saved.
5.1 Starting the Scan To PC Utility
1.
Connect the scanner to your computer with a USB cable. If
successfully installed, a Removable Disk (F) (F represents the
removable drive letter) will be shown in the Windows Explorer. If a
memory card is inserted to the scanner, the Removable Disk will be
replaced with the name of the memory card.
2. Insert the Scan To PC CD provided and Double click on Setup.exe.
Now, the Scan To PC Utility runs, and the icon stays on the
system tray. OR as an Icon on your Desktop.
3. Right click the icon in the system tray and select SETTING (or
Double Click on the Desktop Icon) to Open the Scan To PC Utility
screen, as shown below:
4. To save the scanned images to your computer, select Scan To PC in
the drop-down menu of Save Type.
To save the scanned images to your memory card connected to the
scanner, select Memory Card in the drop-down menu of Save
Type.
Important: Once you have installed the Scan To PC Utility and you
wish to save your scanned images to a memory card, you still need
to use Scan To PC Utility and select Memory Card in the drop-down
menu of Save Type.
5. Click the Browse button to save your scanned images to a
specified location. (Default is C:\temp\)
6. Click Apply to save the settings or Cancel to leave the Setting
screen without saving the changes. Note the Scan to PC Utility icon
is still running in your system tray.