DICE Electronics MediaBridge MB-1500 Toyota - Manual (Page 26)

26
Accessing the auxiliary input
• An auxiliary audio device can be connected to the MediaBridge
unit through it’s 1/8” headphone jack.
• In AUX mode, music is controlled only through the auxiliary
audio device.
• Audio equilizer setting can be adjusted while in auxiliary mode
by selecting PRESET 1-4 (DISC 1-4) and using seek/track/tune
buttons to increase or decrease levels. DISC/PRESET numbers
and corresponding setting are shown on the right chart.
TIP: In CDC/MP3/MD emulation, selecting DISCS is done by using the DISC +/- buttons.
PRESET/DISC 1
PRESET/DISC 2
PRESET/DISC 3
PRESET/DISC 4
CHANGE VOLUME SETTING
SEEK TRACK
SEEK TRACK
SEEK TRACK
SEEK TRACK
CHANGE BASS SETTING
CHANGE MID EQ SETTING
CHANGE TREBLE EQ SETTING
1/8” mini stereo jack (not included)
Sleeve (Ground) Ring (Right audio) Tip (Left audio)