DICE Electronics MediaBridge MB-1500 Toyota - Manual (Page 16)

16
Basic operation
Accessing MediaBridge as the audio source:
Much like the radio’s AM/FM tuner, satellite radio or CD audio sources, the MediaBridge is integrated to be
part of the vehicle’s audio system. To access the MediaBridge source, press the SAT (for SAT emulation) or
DISC (for CDC/MD/MP3 emulation) button on the radio. Pressing this button repeatedly will cycle through
sources present in the vehicle.
MediaBridge source selection:
The MediaBridge adds additional audio sources including USB iPod/Memory, SIRIUS Satellite Radio*,
Bluetooth and Auxiliary audio input. To cycle between these sources, use the SEEK/TRACK/TUNE buttons
within the first 5 seconds of accessing the MediaBridge as the audio source while in PRESET/DISC 1.
*This source require additional parts/accessories/service from DICE and/or third parties.
MediaBridge Interface settings: (within first 5 seconds of accessing the MediaBridge as the audio source)
Select DISC/PRESET 1 to apply settings and resume audio playback.
Select DISC/PRESET 3 to change default volume level; use track up/down to adjust between Min and Max.
Select DISC/PRESET 4 to enable/disable scrolling text. (SAT emulation only)
Select DISC/PRESET 6 to view MediaBridge serial number and firmware version.
DISC 2 and 5 have no settings available.