DaySequerra Remote Dashboard - Manual (Page 9)

9
Ethernet Configuration Guide
Figure 1.0
Controls and Buttons
Station – Left Box contains the current band and frequency
Right Box contains the call letters for the current station
HD Locked – will be displayed if there is an at least one HD frequency detected and locked
Band – switch between AM and FM bands by selecting the appropriate button
Tuning – manual tuning of the current station using the UP and DN buttons.
200 kHz spacing in FM; 10 kHz spacing in AM
Presets – store 50 preset or stored AM or FM stations. To store a preset, tune to the
desired station,
press and hold the preset buttion (F1-F50 or AM1-AM50). Once stored,the station’s call letters will be
displayed on the button. To remove a preset, select the preset button and press clear. The button will
return to F10-F50 or AM1-AM50.