DaySequerra Remote Dashboard - Manual (Page 3)

3
Ethernet Configuration Guide
Remote Dashboard Application Installation
Note: If you have not yet registered your unit please email DaySequerra at
[email protected] to register your unit and receive your password.
From CD:
1. Place disk in your PC’s CD drive.
2. Installation should start automatically, if not
• Click on “Start” > “My Computer”
• Right click on your CD Drive
• Select
Autoplay
3. You will be notified "You are about to install DaySequerra Remote Dashboard V1.3.8".
• Click "OK"
4. You will be prompted for a location to unzip the setup files, accept the default.
• Click "Unzip"
5. Enter the password supplied to you by DaySequerra.
• Click
“OK”
6. Click “Yes” to install the Microsoft Visual Basic 6 Runtime environment.
7. Dashboard Setup follows automatically and use all specified defaults.
8. Follow the user prompts to finish installing the Dashboard Software.
Download from FTP site:
1. Go to ftp.daysequerra.com
2. Username: dashboard1
Password: Remote09
3. Download the file DaySequerra_Dashboard.exe
4. Enter the unlock password obtained by DaySequerra when you register your unit.
When installation is complete, click on the DaySequerra > Remote Dashboard icon under your
Programs Menu to start Remote Dashboard.