DaySequerra M4FM-HD - Manual (Page 17)

17
M4FM-HD User Manual
• Output 5 – RF Carrier loss, Audio Loss, OFDM Lock Loss, HD Lock Loss, Multicast Loss, Over
Modulation, Empty Default: Multicast Loss
• Output 6 – RF Carrier loss, Audio Loss, OFDM Lock Loss, HD Lock Loss, Multicast Loss, Over
Modulation, Empty Default: Over Modulation
Toggle the arrow to the top right of the LCD and select EXIT to revert back to the previous page.
Audible Alarm Buzzer
“ON” or “OFF” option using UP and DN switches to toggle the setting. Select “ON” for audible alarm to
beep during any active alarm condition and continue with alarm configuration menu; select “OFF” for
audible alarm to be silent during any active alarm condition. Press ENTER to save and exit to the
previous Alarm menu
FM De-Emphasis
Switch between 75µsec and 50µsec. M4FM-HD is set to 75µsec by default. Press ENTER after
making a selection to save and EXIT to the previous menu. (Figure 12)
Figure 12.
Region
Figure 13.
M4FM-HD supports 100 KHz or 200 KHz tune spacing for US and Euro. (Illustrated in figure 13.) The
factory default is set to US, 200 KHz. Press ENTER after making a selection to save and EXIT to the
previous menu