DaySequerra M4.2Si AM-FM - Manual (Page 13)

13
M4.2Si User Manual
HD Lock Loss
Delay: Use the arrow buttons to select from 1 – 300 seconds of delay (default – 15 sec)
Status: Use the arrows to toggle between Enabled or disabled to turn the alarm ‘ON’ and ‘OFF’ (default
– disabled)
Save: Saves all conditions and exits back to the Alarm menu.
Multicast Loss
Delay: Use the arrow buttons to select from 1 – 300 seconds of delay
Status: Use the arrows to toggle between Enabled or disabled to turn the alarm ‘ON’ and ‘OFF’
Save: Saves all conditions and exits back to the Alarm menu.
Figure 7.
Alarm Buzzer
“ON” or “OFF” option using UP and DN switches to toggle the setting. Select “ON” for audible alarm to
beep during any active alarm condition and continue with alarm configuration menu; select “OFF” for
audible alarm to be silent during any active alarm condition. Press ENTER to save and exit to the
previous Alarm menu
Exit
Located at the top right corner of the Alarm menu is used to exit back to the previous SYSTEM menu.
From Alarms menu press the UP arrow button until the arrow is to the right of EXIT on the LCD then
press ENTER to exit.