DaySequerra Mono2Stereo - Manual (Page 7)

M2S
User
Manual
7
Installation
Immediately upon receiving your Mono2Stereo, please make a careful inspection for any shipping
damage. If damage is found or suspected, please notify the carrier at once and then contact your
dealer. Mono2Stereo is shipped in one carton, which contains: the Mono2Stereo unit, an AC power
cable and supporting documentation.
We strongly encourage you to save the shipping carton and shipping materials supplied with your
Mono2Stereo. They are specially designed to properly protect your Mono2Stereo, and in the event that
you need to return it for service, only these OEM shipping materials can ensure its safe return to our
factory.
We provide a limited 1-year warranty on all of our products; however, if you don’t register your unit, it is
impossible for us to contact you to notify you when important software upgrades become available.
Please take a few minutes to complete the warranty registration form on our website,
www.daysequerra.com.
Rack
Mount
Installation
The Mono2Stereo chassis has four rack mounting holes and has been designed to fit in a standard
1RU space. Plastic ‘finishing’ washers are recommended to protect the painted surface around the
mounting holes. Locate the air vents on each side of the unit, and be sure to keep them clear so the
unit may have adequate ventilation.
Power
Connection
The AC power cable supplied with Mono2Stereo must be connected from the IEC320 power entry
module to an AC mains outlet with a functional earth ground connection. For protection against electric
shock and electro-magnetic interference, do not plug the power cable into a ground lifting adapter or
remove the cable’s grounding pin. If in doubt, please consult a qualified electrician. Please connect
Mono2Stereo to an uninterruptible power supply (UPS) to protect against power surges and
low-voltage conditions.
Mono2Stereo will automatically power up when AC power is applied. If AC line power is lost or
momentarily interrupted, Mono2Stereo will revert to its previous state.