DaySequerra Mono2Stereo - Manual (Page 16)

16
M2S
User
Manual
Alarms
Menu
All alarms are disabled by default at the factory. To take advantage of this function, the desired settings
need to be enabled.
AES Lock: Allows the AES Lock alarm to be suppressed.
About
Menu
Model Number: Displays the model number of the unit.
Serial Number: Displays the serial number of this unit.
Hardware Rev: Displays the hardware revision level of this unit.
Firmware Rev: Displays the firmware revision level that is running on this unit.
DTS Algorithm: Displays the specific DTS algorithm running.
DTS Algorithm Rev: Version of the DTS algorithm running on this unit.
Faults
Although your Mono2Stereo will provide you with years of trouble free service, occasionally problems
may occur. Below is a listing of the most common fault conditions.
No Sync: AES sync has been lost. Please check the source equipment and all cable connections.
Ensure that Mono2Stereo is operating in the proper input mode for your application and is looking for
the source audio on the correct port.
CRC Error: Mono2Stereo has encountered a CRC error in the audio stream.
Validity Error: Mono2Stereo has encountered a validity error with the audio stream.
Bi-phase Error: Mono2Stereo has encountered a bi-phase error with the audio stream.
No Parity Error: Mono2Stereo has encountered a parity error with the audio stream.