DaySequerra Mono2Stereo - Manual (Page 17)

M2S
User
Manual
17
Advanced
Routing
Advanced routing is an additional operating mode supported by Mono2Stereo. In short, advanced
routing will allow Mono2Stereo to drive multiple physical outputs from one physical input source.
The factory setting for advanced routing is disabled on Mono2Stereo. In this default configuration, each
of the Mono2Stereo channels can be seen as directly relating to that respective physical input and
output ports. That is, channel one will receive input from AES or analog port one, and the resulting
audio output drives AES and analog port one outputs.
With advanced routing enabled, the I/O function of Mono2Stereo should be visualized as each channel
drives that respective output only. Channel two may be configured to receive its input from AES input
one, and the resulting audio output drives AES and analog port two outputs.
Channel input settings are configured on the home screen, as described in the home screen section of
this manual. Additional input options will be available when advanced routing is enabled, such as
AES 1-L or ANA 3-R.