darTZeel Audio CTH-8550 - Manual (Page 11)

darTZeel CTH-8550 User Manual, version 1.0 Page 11 of 15
After selecting “Rename” from the above
PARAMETERS menu, the default input
source displayed is the one you have
selected for listening.
Press ▲ or ▼ in order to change the source
to be renamed.
Press ◄ or ► to select the character
(alphanumeric key) to be changed.
Press + or – in order to browse from A-Z
and 0-9.
Space (blank) is just before “A”.
Press OK to confirm the new name.
Press RST
and OK in order to return to the
factory default name.
After selecting “Settings” from the above
PARAMETERS menu, the default input
source displayed is the one you have
selected for listening.
Press ▲ or ▼ to select another source.
Press + or – in order to adjust the input
level.
The range is from -10dB to +10dB.
Press OK to memorize the level.
Press RST to return to 0dB.
Press ► to set Input balance, hereunder.
Altering the default balance for a source can
be helpful when a particular source, such as
a phono cartridge, exhibits a channel
unbalance.
Press + or – in order to adjust the input
balance.
The range is from 9.5dB Left to 9.5dB
Right.
Press OK to memorize the balance setting.
Press ▲ or ▼ to select another source.
Press RST to return to 0dB.
Press ► to set Input mode, hereunder.
Altering the input mode for a source can
be helpful for a monophonic source such
as an old AM tuner, or a mono or 78-rpm
phono cartridge.
Press + or – in order to toggle between
Stereo and Mono.
Press OK to memorize the input mode.
Press ▲ or ▼ to select another source.
Press RST to return to Stereo.
Press ► to set Input bypass, right after.
The “USER INFORMATION”
screen indicates the serial number
of your CTH-8550, as well as your
registered name.
Please be sure the registered name
corresponds to yours.
If the registered name is not correct,
immediately contact your dealer.
An improper registered name will
void access to warranty rights.
Used for Home Theatre systems.
The gain of the bypassed source is 0dB
.
WARNING
Pleasure Control will be bypassed!!!
Press + or – in order to toggle
between bypass On and Off.
Press OK to memorize.
Press ▲ or ▼ to select another
source.
Press RST to return bypass to Off.
Go to next page
Go to Page 13