Clay Paky SHOW BATTEN 100 AS - Manual (Page 25)

25 SHOW BATTEN 100
TECHNICAL DATA
226
(8.90")
170
(6.69")
100
(3.94")
186
(7.32")
1000
(39.37")
Power supplies
• 100/240V 50/60 Hz
• Automatic power supply
Input power
• 170 VA
• Max 1700VA connecting Max 10 units
Total lumen output
SB100
: Max 2.840 lm
SB100AS
: Max 2.590 lm
Light source
10x15W LED RGBW
- Type: OSRAM OSTAR - SMT LE RTDUW S2W
- Color Temperature: 6.000 K
- Life: 50.000 hrs
- Luminous flux: 6.800 lm
Motors
3 stepper motors, operating with micro steps,
totally microprocessor controlled
Channels
• 10 channels DMX 512 standard mode
• 50 channels DMX 512 extended mode
Control inputs
• DMX 512
• ART-NET
Moving body
Automatic repositioning of TILT after accidental
movement not controlled by control unit.
PAN
No Rotation
TILT
• Angle rotation: 240°
• Fast speed: 0,2 sec
• Resolution tilt: 0,94
Weight
10 Kg (22 lbs)
IP rating
• IP20
• Protected against the entry of solid bodies
larger than 12mm (0,47”)
• No protection against the entry of liquids
Safety devices
• Automatic shut-down in case of power supply
overcurrent or overheating
• Automatic derating, in case of LED overheating
or failed operation of cooling system
Cooling
Forced ventilation with fans and heat sink
Body
• Body extruded in black anodized aluminum
• Aluminum and steel structure with plastic
covers
Working position
• Any working position
• Hanging system: with fast-lock omega clamps
(1/4 turn) on the base
Optics
• 45mm diam. lens
•
SB100
: Zoom: min 10°x23°, max 43°x48° (at
50%); min 23°x35°, max 66°x76° (at 10%)
•
SB100 AS
: Zoom: min 8°x25°, max 9°x45° (at
50%); min 18°x37°, max 21°x74° (at 10%)
• Fast speed: 0,3 sec
Color system and effects section:
• Individual color RGBW control for each LED
• Global dimmer
• Color temperature control from 2.500 K to 8.000 K
• Strobe from 1 to 20 flashes/sec
• Random and macro strobe
• Macro color
Control and programming:
• DMX protocol signal: USITT DMX 512
• Display: LCD 2 lines with 16 characters each,
backlit LED, white on black
• Tilt Resolution: 8 bit
• Dimmer Resolution: 8 bit
• Strobe 20Hz
• DMX signal connection: 5 pole XLR input and
output
• Software upload through DMX input
Electronics
• Long life self-charging buffer battery
• Electronic monitoring with status error
• Cooling system monitoring
• DMX level monitoring on all channels
• Internal data transmission diagnostics
• Firmware upgrade with no power
• Firmware upload from another fixture