Clay Paky STORMY CC - Manual (Page 17)

17
PRELIMINARY
STORMY C71090
STORMY CC C71091
INFORMATION MENU - DMX MONITOR
It allows to visualize the DMX input level (in bits or as a percentage) of each channel of the projector (value
Between 0 and 255 bit or between 0 and 100%).
INFORMATION MENU - FANS MONITOR
It allows to display the rotation speed ( RPM Speed) of the fans installed on the machine.
PwrSp = Power Supply fans.
5.4 MANUAL CONTROL MENU
MANUAL CONTROL - RESET
It allows to reset the projector’s CPU in case of anomalies.
MANUAL CONTROL - CHANNEL
It allows to set a value in bit to the channels, from the projector control panel for manual control of each effect
without the need of a DMX input signal (values between 0 and 255 bits).
5.5 ADVANCED MENU
To access to the Advanced menu (only recommended for experienced users), you need to set the access
code 1234.
ADVANCED MENU - FIRMWARE UPLOAD
It allows to transfer the firmware from one projector to the others connected to it.
ADVANCED MENU - MODEL SETUP
It allows to change the projector’s model set, selecting among the available:
• Undefined
• Stormy
• Stormy CC